G-Corporation 180SX Flash Type 1 Kit - 6pc

G-Corporation 180SX Flash Type 1 Body Kit - Flash type 1 front bumper, side skirts, rear bumper, 30mm front fenders, 50mm rear fenders, type 1 or type 2 rear wing

Kit is already included, you just need to select your wing type!

G-Corporation 180SX Exclusive Flash Type 2 Rear Wing

The overall width is longer than the late-model 180sx genuine wing, and the edges of the wingtips are sharper. It can be installed completely bolt-on on late-model 180s. Also, if your vehicle is equipped with a wing-type genuine rear spoiler, it can be installed without modification by using the genuine mounting holes.

[FLASH] Rear spoiler for 180sx [Type 2] x 1

　　・Material: FRP
　　・Condition: White gel coat finish (unpainted)
　　・Country of origin: Japan
　　・Compatible models: Universal
　　・Accessories: Instruction manual

　□ Product size

　　　・Installation position (center to center): 970mm
　　・Foot height: 105mm
　　・Wingtip length: 1510mm
　　・Wingtip width: 480mm
　　・Body width: 215mm
　　*Please use as a guide only as these are actual measurements.



G-Corporation Universal Flash Low Mount Rear Wing Type 1

With a total width of 1750mm and mounting feet height of 50mm, it is a universal product and can be installed on a variety of vehicle models.
[FLASH] Universal Rear Spoiler [Type 1] x 1

　　・Material: FRP
　　・Condition: White gel coat finish (unpainted)
　　・Country of origin: Japan
　　・Compatible models: Universal
　　・Accessories: Instruction manual

　□ Product size

　　・Installation position (center to center): 805mm
　　・Foot height: 50mm
　　・Wingtip length: 1750mm
　　・Wingtip width: 440mm
　　・Body width: 290mm
　　*Please use these measurements as a guide only.

G-Corporation Universal Flash Low Mount Rear Wing Type 2

　The overall width has been extended compared to the late-model 180sx genuine wing, and the edges of the wingtips have been given a sharper finish.

[FLASH] Universal Rear Spoiler [Type 2] x 1

　　・Material: FRP
　　・Condition: White gel coat finish (unpainted)
　　・Country of origin: Japan
　　・Compatible models: Universal
　　・Accessories: Instruction manual

　□ Product size

　　・Installation position (center to center): 970mm
　　・Foot height: 105mm
　　・Wingtip length: 1510mm
　　・Wingtip width: 480mm
　　・Body width: 215mm
　　*Please use this as a guide only as it is measured from the actual product.

PLEASE NOTE: ITEMS ARE 3-5 MONTHS OUT FOR PRODUCTION ON THE JAPAN SIDE. WILL ONLY SHIP TO COMMERCIAL ADDRESS.