HKS S Type Oil Cooler KIT SINGLE Z34 VQ37VHR BLK - 15004-AN124
HKS
$882.00
$980.00
(You save
$98.00
)
Write a Review
HKS
HKS S Type Oil Cooler KIT SINGLE Z34 VQ37VHR BLK - 15004-AN124
HKS S Type O/C KIT SINGLE Z34 VQ37VHR BLK
This kit is BRAND NEW and there are basically no good pictures or information on the kit. It is a single oil cooler kit for the Z34. Judging on previous HKS Oil Cooler kits for other cars, this kit should be very complete with all needed accessories.
KoruWorks will update with new pictures as they are provided.
FREE SHIPPING IN THE USA FROM HKS JAPAN!
* NOTES BASED OFF OF Z34
You must have this item if you are driving Z34 at a circuit, because when you are driving, the oil temperature will rise and the fail-safe system will be turned on.
■Features
- When driving the Z34 and the engine oil temperature goes above 135℃ (130℃), the fail-safe will limit the throttle duration and the max RPM. But this kit will prevent the fail-safe system to activate.
- 15 rows core (W200 X H220 X T48) is in front of the radiator.
- For installation of the kit you need parts modification of resin protector and alternator bracket.
- Installation requires approximately 3 hours.
■Characteristic
At the Fuji Speedway test drive with the stock, we couldn't even go for one lap because of the fail-safe, but with the HKS Oil Cooler Kit installed we could go for 6 laps.
* We recommend the twin core kit for long run at the circuit.
* The output data is test result of HK. The results may vary for different condition.
■Test vehicle SPECIFICATION
METAL CATALYZER / Center Pipe / LEGAMAX Premium
■Components
| COMPONENT | Oil Cooler kit |
| Oil Cooler core W200 X H220 X T48 15 rows | ○ ※ |
| Oil Cooler core W200 X H220 X T48 15 rows | |
| #10 Stype Adapter thermo ASSY | ○ |
| Attachment bolt | ○ |
| #10 90°Fitting-110cm stainless steel mesh hose -90°Fitting | ○ |
| #10 45°Fitting-95cm stainless steel mesh hose -150°Fitting | ○ |
| #10 180°Fitting-105cm stainless steel mesh hose -90°Fitting | ※ |
| #10 45°Fitting-90cm stainless steel mesh hose -90°Fitting | ※ |
| O-ring | ○ |
| Oil Cooler core bracket X 2 | ○ |
| Corrugate tube | ○ |
| Installation bracket (1) | ○ |
| Installation bracket (2) | ※ |
| Air guide (1) | ○ |
| Air guide (2) | ※ |
Products marked with an asterisk (※) are required to use this kit as twin core kit.
- LTL:
- N
- MPN:
- 15004-AN124
- Proposition 65:
- N
- Special Order:
- Y
- Universal Fitment:
- Y
