HKS S Type Oil Cooler Kit ZN6E for Supercharged Application BLK - 15004-AT112

New type of HKS Oil Cooler Kit for 86/BRZ is released. This new kit is able to install to the inner side of the fender!! Recommended for vehicles tuned with GT Superchargers or upgrade turbines, and circuit use that requires precise oil temperature maintenance.

■Features

• Installing the core to the inner side of the fender enables a vehicle tuned with GT Supercharger to install a front mount type intercooler kit. Also, a special air guide is included to provide higher cooling performance; this kit is also recommended for NA vehicles who enjoy circuit driving.
• Special spacer and center bolt are included so the kit parts do not come in contact with the brim on the oil filter installation position when installing the oil cooler attachment.

 ■The following parts are included

Oil Cooler Core / S-type Attachment / Spacer / Center Bolt / Banjo / Banjo Bolt / Bracket / Air guide / Oil Cooler Hose / Accessory Parts

【The characteristics of oil temp. and the water temp.】

※ This is the result of the test HKS conducted. The result may vary depending on the test conditions.

●Test Data

* The circuit driving by 86/BRZ with GT Supercharger which engine output was increased to 300ps was done under conditions that was very difficult to maintain the oil temperature. However, the oil temperature of this vehicle with this oil cooler kit was maintained around 110℃ through the 25 min test drive without any trouble.

Vehicle	Model	Engine	Model Year	Core Size・Row	Core Location	Type	Hose Size	Aluminum Air Guide	Code No.	Manual	Remarks
												86	ZN6	FA20	16/08 -21/10	200x200x32・15	Inside right fender	S type	#10	○ (FRP)	15004-AT112		Compatible with GT SUPERCHARGER System Pro kit, GTIII-RS Bolt On Turbo kit, GT4525 Bolt On Turbo kit, and GT4135 Bolt On Turbo Kit. Cannot be installed the fog lamp or BRZ LED accessory liner. Modifications of the radiator support and resin cover are needed.