Wisefab Nissan 370Z Rear Suspension Drop Knuckle Kit

Make all your rear grip dreams come true with this WiseFab rear suspension kit! 

• Revised kinematics, not just dropped knuckle. - Nissan 370Z is a well designed car for enthusiast driver. The car performs well on streets and can be taken to a race track. If the focus is more towards performance, then the car can act even better with lowered ride height, but then the factory designed kinematics wouldn't work as it supposed to. The Wisefab kit would give a good kinematics with lowered car - higher roll center, anti squat, revised cambergain and bump steer for maximum grip.
• About the same weight as original aluminium suspension - All the metal components on Wisefab 350Z rear suspension are from high strength steel, including sheet metal components, tubes, tube ends and rod end housings. Also for weight reduction and stiffness purposes all the suspension links are designed straight and tubular. Top arm is sheet metal boxed type. CrMo 3 piece design rod ends and spherical bearings used, no rubber bushings.
• Easy camber adjustment - Special toothed washer is used for adjustment.
• Bump steer adjustment - Possibility to adjust bump steer by changing rod end location in a slot.

Other components

Hub to hub length (track) is the same as original, as this is defined by half shaft lengths.
This kit assumes coilovers to adjust ride height and use spring around the shock not on rear link
Possibility to use either original 370Z , 350Z or S-Chassis hub with bigger CV joint.
Minimum rim size is 17"

370Z/G37 Rear Installation Guide (473.15 kB)