HKS Nissan GTR Short Block RB26 3.0L STEP 3 - 23011-AN027

HKS Nissan GTR Short Block RB26 3.0L STEP 3 - 23011-AN027

HKS
UPC:
4957266630594
Availability:
This part is back-ordered therefore shipping time will vary.
$48,544.65
$53,938.50
(You save $5,393.85 )
Current Stock:
Adding to cart… The item has been added
Description

HKS Nissan GTR Short Block RB26 3.0L STEP 3

(ENGINE) SHORT BLOCK RB26 3.0L STEP3

ENGINE BLOCK COMPONENTS

SHORT BLOCK RB26 3.0L STEP3

Newly developed 2-piece piston achieves increased stroke and connecting rod length while maintaining the same block height.

  • The exclusive 3.0L crank is machined from high-end race grade nitride steel that is ion plasma treated to increase surface strength and toughness.
  • In preparation for high torque, dedicated I-beam connecting rods with 36% increase buckling strength and a 22mm thicker piston pin were adopted.
  • Various design changes were made to countermeasure against heat generated during higher output, such as, changes to valve guide and seat materials, adoption of sodium-filled EX valves, and pistons with cooling channels
  • Dedicated 36-tooth crank angle sensor and crank angle sensor for V-cam improve signal accuracy in the high-RPM range.

  • Exclusive full counter crank

  • Exclusive I-beam connecting rod with 36% increase in buckling strength and 6mm longer shaft distance.

  • Machined 2-piece piston

The two-piece piston have a higher pin position making it possible to reduce the compression height. This made it possible to increase the length of the connecting rods without the need for high decking. The extremely lightweight 313g pistons, have cooling channels for oil cooling.

Specifications

 HKS 3.0L純正
Bore 86.5mm 86.0mm
Stroke 84.0mm 73.7mm
Compression Ratio (t=0.84) 8.7 -
Max RPM 9,000rpm 7,600rpm
Displacement 2,996cc 2,568cc

SHORT BLOCK RB26 3.0L STEP3

Block (24U) Modification Block deck Resurfacing (Parallel to the crankshaft),
Waterhole Machining, Head bolt hole chamfering (to prevent cracking),
Deburring lower end of cylinder, Boring
Piston HKS 2-piece machined
Piston Pin 22mm Enhanced Product
Connecting Rod HKS I-Beam Center Distance: 127.5 mm
Crankshaft HKS Billet Full Counter (Ion plasma treated nitriding steel)
Main Bearing ACL
Conrod Bearing ACL
SHORT BLOCK
Additional Information
LTL:
Y
MPN:
23011-AN027
Proposition 65:
N
Special Order:
Y
Universal Fitment:
Y
Related Products