HKS 2009+ Nissan 370Z S-Type Single Oil Cooler Kit - 15004-AN024

HKS
UPC:
4957266655481
Availability:
This part is back-ordered therefore shipping time will vary.
$15,376.46
Shipping:
Free Shipping
Current Stock:
Adding to cart… The item has been added

HKS S-Type Single Oil Cooler Kit for 2009+ Nissan 370Z (Z34) - 15004-AN024

The HKS S-Type Single Oil Cooler Kit is an essential upgrade for Nissan 370Z owners who frequently drive on circuits. When the Z34 is pushed to its limits, engine oil temperatures can rise significantly, causing the fail-safe system to activate, which limits throttle response and max RPM to protect the engine. This kit effectively manages oil temperatures, preventing the fail-safe system from engaging and allowing you to fully enjoy the performance of your 370Z.

Key Features:

  • Effective Cooling: The 15-row oil cooler core (200mm x 220mm x 48mm) is mounted in front of the radiator, significantly improving cooling efficiency.
  • Prevent Fail-Safe Activation: Keeps oil temperatures below 135℃ (130℃), preventing the fail-safe system from limiting your vehicle's performance.
  • Installation Time: Approximately 3 hours. Some modifications to the resin protector and alternator bracket are required for proper installation.
  • Proven Performance: Tested at the Fuji Speedway, the stock vehicle triggered the fail-safe before completing a lap. With the HKS Oil Cooler Kit installed, the car could run 6 consecutive laps without any performance limitations. For extended circuit runs, the twin core kit is recommended.

Specifications:

  • Core Size: 15 rows, 200mm x 220mm x 48mm
  • Components Included:
    • Oil Cooler Core 15 rows
    • #10 Stype Adapter Thermo Assembly
    • Attachment Bolt
    • Various Stainless Steel Mesh Hoses with Fittings
    • O-ring
    • Oil Cooler Core Bracket x2
    • Corrugate Tube
    • Installation Brackets
    • Air Guide
    • Free Shipping In The USA!

Remarks:

  • Installation requires minor modifications to the resin protector and alternator bracket.
  • Due to the pop-up engine hood design, disconnect the negative battery terminal and wait 3 minutes before removing the bumper.
  • Washer tank relocation is not necessary.
  • When using the twin core kit for extended cooling, bumper modifications are required for effective cooling. However, this setup may impact the normal actuation of the pop-up hood system.

Upgrade your 370Z with the HKS S-Type Single Oil Cooler Kit to maintain optimal oil temperatures and maximize your vehicle's performance on the track, ensuring consistent power without the limitations of the factory fail-safe system.