Modular Solid Engine Mount Delrin E36-E46 Pair
$313.98
Tech-53’s solid engine mounts are not only innovative in their design, but are engineered in such a way, that you can customize where your engine sits.
\n
\nThree choices: stock height (self explanatory), Lowered by 5 mm to lower the center of gravity of the car, or raise 20mm over stock, if your car is really lowered, and you would like a bit more oil pan clearance. Subframe holes may have to be redrilled.
\n
\nOur unique design provide a strong compression in the mount, even if the mount is under tension. Taking the fastener anchor point from the opposite side of the mount, makes this a game changer.
\n
\nNot only does this make it a lot stronger than any other Delrin mount on the market, it also enables the mount to be modular. We highly recommend installing the transmission and engine mounts as a complete kit.
\n
\nLifetime limited warranty when installed with Tech-53’s transmission mounts.
\n
\nThis kit does not fit the E46 Xi models.
\n
\n
\n
\nInstallation Note for Low Boy Configuration:
\n
E36:
\n
\n
\n-
\n
- The fan shroud will need to be modified slightly to make clearance for the fan position moving up. \n
- May need to trim the lower radiator hose .5" to clear the AC belt. \n
- The Vanos cover could make contact with the hood on 98 328is. \n
E46:
\n
\n
-
\n
- The engine hook on top of the motor needs to be removed \n
- The fan will need to be raised by 1 inch. \n