G35 vehicle specific e-brake mount - INSIDE trim mount - LEFT side

When installing a hydraulic e-brake in your car, you'd typically have to drill holes or weld a bracket in place.

We understand that not everyone wants to do that, so we've made these bolt in brackets.

The brackets bolt to the stock transmission shifter hole and allows you to fit our hydraulic e-brake assembly without modifications to the transmission tunnel.

- 100% direct fit with no modifications required to the transmission tunnel
- Available for either center console or side mount LHD and RHD variants.
- Laser cut from 5mm thick 4130 Chromoly sheet and zinc coated for longevity
- Includes 4x replacement M6x20mm bolts

NOTE: Console version will require some trimming under the center console and require you to cut a hole for the lever.

NOTE #2 Inside and outside mounts refer to the position of the e-brake lever when using our mounting plates.

Inside mount = mounts inside/within the center console itself, this will require trimming beneath the AC unit when used on both the left and right-hand side.

Outside mount = mounts outside the center console itself, no modifications required to the trim when used on both the left and right-hand side.

Please refer to product images upon ordering.

NOTE #3 Will NOT fit on automatic vehicles. The automatic tunnel differs to the manual tunnel.