Sabelt Steel Series S632 Saloon 3x2 FIA Harness, Pull Down

This 6-point 3x2 harness from Sabelt can be used in just about any sedan, whether or not the driver is wearing a HANS Device. The anti-sub straps are permanently sewn to the camlock buckle.

The Sabelt Steel Series uses high-strength steel adjusters on the shoulder and lap belts for economy. The 2" lap belt has snap-in end plates sewn in, with pull-down adjusters integrated into the buckle tabs. Tests have shown that a 2" lap belt is safer than the traditional 3" lap belt because the belt rides much closer to the hip bone, which allows it to better control rotation of the pelvis. The 3" shoulder belts and 2" sub straps are equipped with snap-in end plates that can convert to wrap-around mount. Unlike many other brands, the sub straps are sewn directly to the buckle, not to an additional tab which is connected to the buckle. FIA 8853-2016 homologated. Available in Black, Blue, or Red.

Strap lengths (all lengths are maximum length adjustment unless noted):
Shoulder strap, mount to adjuster: 1700mm (66.9")
Shoulder strap, adjuster to buckle: 380mm (15")
Lap belt, mount to buckle: 680mm (26.8")
Anti-sub straps: 850mm (33.5")